aluminum foil strip

Kapton Covered Copper Wire

Source:Original Editing:Frank Time: Email
Kapton Covered /Enameled/ Insulated/ Wrapped Aluminum/Copper Wires Strips

Kapton Enamel Wire——Amulti-layer Kapton & fluoropolymer dispersion coated film
 
Kapton Enamel Wire adopts high-quality F46 Polyesterimide layer and finishs through high heat sintering.
Kapton Enamel Wire’s temperature can reach 290℃ and its voltage class can be 7200v.
Special processing technology makes the product have high mechanical properties, stronger overload capacity,
heat-resistant properties and suitable for large and medium-sized motor coils and winding of electrical appliances
Kapton Enamel Wire is ideal for demanding magnet wire applications and for difficult-to-wind motors.
Kapton Enamel Wire also is a multi-layer Kapton & fluoropolymer dispersion-coated film.
The fluoro polymer coating functions as a heat-fusible layer for bonding to magnet wire conductors.
It has superior scrape abrasion resistance and exhibits lower frictional properties than wire insulated with other commonly used Kapton materials.

 
Product Introduction:
 
    This product is on the high quality aluminum conductor on the uniformity of the Kapton fluorine 4.6 composite film, after heating the composite film on the fluorine 4.6 melt, so that the coating and the conductor, film bonding between a whole. The product has excellent resistance performance voltage, temperature resistant grade for class H 220℃, resistance to high temperature and radiation, is winding volume small, high output, high reliability of electrical products the ideal winding line varieties.

Conductor : copper
Insulation : F46+Kapton film
Diameter Range (mm): round : 1.5-4.0 Flat: a: 1-5.6 b: 3-16
Temp Class : 240C
Standard : NEMA, GB, IEC
Package : 50kg/100kg/150kg wooden spool
Apppcation : used in aerospace, submersible motor and high voltage coil, wind turbines, micro-electronics and other fields.


 
 
Conductor materials:
 
1.Aluminum wires strips should follow the standard of GB5584.3-85, at 20℃ its conductivity resistance should be not more than 0.02801℃mm2/m.
2.Flat conductor size and R angle should be in line with the national standard GB/T7673.1-87
3. The surface of the round conductor shall be smooth, clean, without any abrasion, burr, oil and metal foam.
4. The connection of circular and flat conductor plane should be smooth, with sharp protrusions and not allowed.

 
Product breakdown voltage follow the below table:

Narrow side(a) 
standard size mm
Breakdown voltage Narrow side(b) 
standard size mm
Breakdown voltage
Single layer
 wrapping
Double layers
 wrapping
Single layer 
wrapping
Double layers
 wrapping
a≤3.00 2000V 3000V 3.00≤a≤6.00 1500V 2500V
2500V 4000V 2000V 3000V
3000V 5000V 2300V 3500V
3500V 6000V 2600V 4200V
4000V 7000V 3000V 5000V





Packing Process : 

Step 1 :  Plastic film and kraft paper packaging, ensure neat and clean, dry ;  



2. Wooden box packaging, the outside fixed with packing belt, safe and reliable ; 

RELATED READ: