aluminum foil strip

Transformer Strip

Enameled aluminum magnet flat rectangular wire

Source:Original Editing:frank Time:2017-08-08 15:04
Inquiry:
Enameled aluminum magnet flat rectangular wire strips

Class 130/155/180/200/220 enamelled aluminum(copper) rectangular and square wire
 
Product introduction:
 
    Enameled aluminum (copper) magnet round rectangular wires strips is made of oxygen free (copper) rod or electrical round aluminum rod by a certain size of the die drawing or extrusion of the wire, the insulation paint through many times of the winding wire. Mainly used in winding of transformers, motors, generators, and various electrical devices.



Product Range:
 
Wires strip thickness a: 0.80--7.0mm
Wire strip width b: 2.0--16.0mm
Recommended width ratio of conductor: 1.4<b/a<8.0
Temperature Class(鈩�) : 180, 200, 220
Standard : IEC60317-0-2,IEC60317-29 MW36-A
Bobbin : 30/50kg wooden spool,plastic spool,we can customize the length according to customer demand
 
Special size can be made with discuss.

Feature  
 
High thermal class
High chemical stability
Good mechanical properties
High breakdown voltage, good formability

Application Of Enameled Square Aluminum Wire 锛� Transformers, generators, refrigeration systems, class C generators, UPS power supplys, electronic transformers

 
Aluminum (copper) Wires Strips:
 
    Enameled aluminum (copper) magnet round rectangular wires strips, is made by soft (copper) flat and soft (copper) flat wire in accordance with the provisions of the 5584.2-85 GB, 20鈩僿hen the resistivity is not greater than 0.01724鈩�.mm2/m according to different mechanical strength requirements, the provisions of the semi hard (copper) conductor and aluminum conductor according to different mechanical strength requirements, semi hard (copper) conductor of non proportional C1Rp 0.2 (>100--180) N/mm2, C2Rp0.2 (>180--220) N/mm2, C3Rp0.2 (>220--260) N/mm2. 20 degrees of resistivity is less than 0.02801 鈩�.mm2/m according to different electrical insulation requirements, selection of thin film 0.06--0.11mm or the thickness of the film 0.12--0.16mm. The heat adhesion paint package flat wire self-adhesive layer thickness is generally 0.03--0.06mm. Our company the loss tester for TD11 painting process for screening, the film fixed more hasten is perfect.
* If have special demand on paint thickness, please contact us as well.

Material 
 
Drawing or extruding bare aluminum (copper)  wire confirm to National Standard, smooth surface, no defects ;Good performance,Insulation varnish.

Product type: 
 
130 grade Polyester enameled aluminum (copper) flat round wire
180 grade polyesterimide enameled aluminum (copper) flat round wire
200 grade Polyimide and polyimide mixed enameled aluminum (copper) flat round wire
120(155) grade polyvinyl acetal enameled aluminum (copper) flat round wire
Specs of Enameled aluminum (copper) magnet round rectangular wires strips

Type Polyesterimide Polyimide and polyimide
 mixed
Polyvinyl acetal Thermal bonding acetal
Temperature-resist grade 180 200 120(155) 120
Property High heat resistance, 
good chemical
 resistance, hydrolysis
 resistance
Excellent heat resistance,
 strong resistance to 
chemical solvents, good
 scratch resistance
Excellent resistance to 
transformer oil, good 
resistance to scratch, 
excellent flexibility and
 adhesion, and good 
water resistance.
In addition to all the performance
 with acetal, also can obtain good 
adhesion strength by the heating 
mode
Standard GB/T7095.4-2008, IEC60317-28 GB/T7095.6-2008, IEC60317-29 GB/T7095.2-2008, IEC60317-18  
Testing 
Standard
GB/T4074, IEC60851-1-6
 
Application   : 
 
Typical applications include: 
Motor
Watt hour meter
Transformer     
Generator
UPS power source
Electric welding machine
Inductive coil
 
Production Process :